AirCube® COM2 TH

Portable air sampler

The era of samplings with long interminable settings can be considered over with the new AirCube™ COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process.

The times of manual By-Pass or inaccurate and impractical calibrated orifices for high and low flows are over. You just need to set the desired flow and then let the sampling begin.

With the flow range included among 0.4 and 30 liters per minute in a single dynamic scale, the AirCube™ COM2 TH has no competitors! The first and only ultra compact The AirCube™ COM2 TH sampler is the true compact in the category with only 24 cm (per side) and 27 cm (height) but with inside the dry volumetric counter as required by the most common current norms.

Unique in its category, equipped with a membrane pump powered by 12V DC elevated flow range and back pressure compensation over 2200mm/H20.

The AirCube™ COM2 TH constant flow sampler belongs to the second generation of portable successful line of samplers manufactured by AMS Analitica.

New for its compactness, lighter in weight, has an exclusive proportional valve for a precise suction flow adjustment. The AirCube™ COM2 TH sampler is adjustable with operational flow included in a single dynamic range among 0,2 and 30 liters per minute without the assistance of by-pass valves and without using particular regulators for operation in the low-flow range. Unique in its category, the AirCube™ COM2 TH sampler is powered by rechargeable batteries and directly from the electrical power network without the use of external power packs. The new microprocessor board with high-resolution, back light graphic display allows an easy and intuitive data setting and immediate readings during operational sampling phases, real time readings all of the information reported to it such as:

  • Immediate flow and average flow of the session,

  • instantaneous dry gas meter temperature and average session temperature,

  • instantaneous environmental temperature and average session temperature,

  • instantaneous and average atmospheric barometric session pressure,

  • Partial volume sampled and sampling time. Furthermore, still from the display it is possible to follow the progress of the sampling graphically distributed on the base of aspiration flow and time. This option allows the verification and validation of the sampling validating the data with the calculation of the standard deviation.

Additional features:

- Flow adjustment range 0.2-30 liters/minute
- Maximum operational flow 28 liters/minute (tested with 47 mm Fiberfilm filter 1800 mm/H20)
- Maximum attainable compensation: 2200 mm/H20
- Controlled electronic compensation of loss of load
- Single head membrane aspiration pump
- Pulse attenuator with pressure control incorporated
- Automatic flow regulation of the aspiration flow with patented proportional valve
- Sampling time and volume setting directly from the keyboard
- Sampling flow setting directly from keyboard
- Instantaneous detection and calculation of the average for:
- Dry gas meter temperature
- Environment temperature
- Atmospheric barometric pressure
- Aspiration flow
- Wind speed and direction (when the sensor has been installed)
- Graphic viewing of the sampling progress with calculation of the standard deviation
- Remote control by way of GSM/GPRS data card chance (Optional)
- Sequential group management with solenoid valves for particles and gas chance
- Total volume detectable from the integrated volumetric counter
- Setting of the standardization temperature chance
- PC board conformed to the RoHS-2006 norm requirements
- Conforms to the EN-12919:2001 norm
- Dual power feed with rechargeable batteries or with 220V standard network electrical power without external power packs or transformers

Physical Features
- Weight 8 Kg.
- Dimensions: 245x245x270 mm (LxDxH)
- EC Conformity on Electromagnetic Compatibility 89/336/EEC referred to the EN 50081-1, EN 6111- 6-2, EN 55014-1, EN 61326-1 end EN 60204-1:1997-12 norms regarding electrical safety tests of the device
- 12V DC power feed with Power Pack Com battery pack (Optional 600/ PP014A3COM2)
- Electrical power feed from the 220V / AC network with standard cable

It is possible to connect 8 place modules to the AirCube™ COM2 TH for sequential particles sampling and the new sequential gas sampling device with the inclusion of GasCheck Basic absorbent sampling tubes.

The AirCube™ COM2 TH sampler is also available in the ISO version, able to carry out stack sampling with adjustment calculation of the suction flows in real time conforming to the requirements of the ISO 9096 norms.

The new sampler AirCube™ COM2 ISO, in a single small and light weight device, is able to acquire all of the parameters inside thestack ducts automatically regulating during sampling conditions.

The sampling device supplied with user manual, calibration certificate, test report, ac plug cable, and RS232 serial cable, USB key to data download, SDC2000 software to display and data download.

Ask more informations

Product: AirCube® COM2 TH

Privacy Policy

INFORMATION TO CUSTOMERS ON THE PROCESSING OF PERSONAL DATA IN COMPLIANCE WITH ART. 13 OF THE EU 2016/679/ REGULATION PERSONAL DATA PROTECTION GENERAL REGULATION

Types of personal data

Dear Customer, AMS Analitica Srl, as Data controller, wishes to inform you that in performance of the contract, or of the formal agreements, personal data will be processed in compliance with the provisions of the Personal Data Protection General Regulation and with due respect for the obligations relating to correctness, lawfulness and confidentiality.  The data undergoing processing refer to the personal data (Company name, address, VAT number, Iban code) of the Company as well as name, surname, address, email-PEC, telephone number, tax code of the persons representing the Company for legal, administrative and commercial activities.


Legal basis and purposes of the processing

The processing of personal data will be made for the following purposes :
  • order formulations, quotation requests, contracts concerning the sale of our the products and services;
  • administrative,  accounting and contractual  management  of the existing legal relationship and relevant legal obligations ;
  • provision of defined products - services;
  • data filing aimed at the retention of accounting documents for the necessary time requested by the standards applicable ;
  • protection of the contractual rights  of the undersigned company, even in the event of a dispute.
  • communications of commercial and promotional initiatives concerning the products - services provided or similar.
For the aforementioned purposes, the processing is necessary for the performance of the existing contract or of pre-contractual measures, implemented upon your request (aimed at, e.g., the negotiation of orders and quotations).  The processing of your personal data for the above said purposes does not require express consent; any refusal to supply data may prevent us from continuing the contractual relationship.

For further purposes related to activities of advertising, promotional and commercial communication concerning new products and services, performed by phone, mailing or postal service, the Company shall process your data only after your express permission to do so.

Procedures of the processing and applied logics

The processing of personal data will be made through documents and paper files and/or by means of   electronic and/or web tools in compliance with the provisions of the law guaranteeing the safety and secrecy of your data as well as the exactness, updating and relevancy of the data with respect for the purposes declared with the aim to avoid access and consequent processing of the data by unauthorized personnel. The logic applied when the data is processed with the use of electronic instruments, employed for the management of personal data aimed at the sale of products and provision of services, is based on the application of a specific policy limiting access to specifically authorized Company’s personnel. As far as possible, the Company applies the necessity principle which provides the configuration of computer systems and programs in order to minimize the use of personal and identification data so as to exclude their processing when the purpose of the specific activity can be achieved by using anonymous data or, respectively, suitable modes that allow identifying the person only in case of need.

Conservation period

Your personal data will be kept by the Data Controller as long as the legal relationship is established.   The said data will only be used to fulfill legal obligations (such as preservation of accounting documents, storage of contract documents for any dispute or contractual liability) for a period of 10 years on expiry of which data will be erased or made anonymous.
For purposes relating to promotional, advertising or commercial activities of products and services other than those by you already purchased and used, your data will be kept until you inform us that you are no longer interested in receiving our communications for the above mentioned purposes.

Dissemination - Transfer availability and communication of data

Personal data shall not be disseminated or transferred to countries outside the EU. Apart from communications made to comply with statutory requirements, such as legal obligations and those foreseen by community rules and regulations, your personal data will be processed by employees and collaborators of the undersigned Data Controller in relation to the specific duties assigned and may be disclosed in Italy to public authorities or private institutions, to companies or professionals, credit institutions, subsidiaries and associated companies, data-processing and  consulting companies, credit collection and insurance companies, professionals  and companies providing consultancy services (e.g.:  legal, fiscal, training and accounting services, etc.), to subjects  who require to access the user’s data for the purpose mentioned above.  All of them shall be provided by the undersigned Data controller of the information which is strictly necessary to achieve the aims for which personal data are collected; this would be done in full respect of the data confidentiality and protection.

Rights of the person concerned

With regard to these data and at any time,  by sending simple written notice to the Data Controller even by email, directly and/or through a delegated person, you will be able to:

  • obtain access to personal data to know the origin of the data, the purposes of data processing, the logic applied to the processing through electronic media, data categories, recipients or categories of recipients of personal data to whom such data may be communicated,  the conservation period of the data by the recipient, and their communication in an intelligible form;
  • obtain the correction, or supplementing of the information, the deletion of data, or the restriction of their processing;
  • object, on legitimate grounds, to the processing of your personal data ;
  • obtain  data portability,  where relevant ;
  • withdraw your consent at any time ;
  • lodge a complaint with a supervisory authority.
The above mentioned rights shall be exercised in accordance with the procedures and provisions of the reference regulations.

PERSONAL DETAILS OF DATA CONTROLLER

Data controller of the processing is the company AMS Analitica  with registered office in Italy - Pesaro,  Ple Coralloni, 12   – email info@amsanalitica.com – Ph +39 0721 26243


 

information to SUPPLIERS on the processing of personal data in compliance with art. 13 of the EU 2016/679/ regulation personal data protection general regulation

Types of personal data

Dear Supplier, AMS Analitica Srl, as Data controller, wishes to inform you that in performance of the contract, personal data will be processed in compliance with the provisions of the Personal Data Protection General Regulation and with due respect for the obligations relating to correctness, lawfulness and confidentiality. In particular, corporate data will be processed (Company name, address, VAT number, Iban code) and  the data of your directors, managers, employees and collaborators involved in the present business dealings, as name and surname, email, phone number, that you communicated us during pre-contract negotiations. Additionally, VAT and Tax number as well as any registration number of professionals will be processed.

Legal basis and purposes of the processing

The processing of personal data will be made for the following purposes:
  • order formulations, quotation requests, contracts concerning the products and services requested;
  • administrative,  accounting and contractual  management of the existing legal relationship  and relevant legal obligations ;
  • performance of the contract ;
  • data filing aimed at the retention of accounting documents and at the protection of the contractual rights  of the undersigned company, even in the event of a dispute.

For the aforementioned purposes, the processing is necessary for the performance of the existing contract or of pre-contractual measures taken on your request and aimed at, e.g., the negotiation of orders and quotations.  The processing of your personal data for the above said purposes does not require express consent. Any refusal to supply data may prevent us from continuing the contractual relationship.

Procedures of processing applied logics and conservation period

The processing of personal data will be made through documents and paper files and by means of   electronic and/or web tools in compliance with the provisions of the law guaranteeing the safety and secrecy of your data as well as the exactness, updating and relevancy of the data with respect for the purposes declared with the aim to avoid access and consequent processing of the data by unauthorized personnel.  
Personal data shall be preserved by the undersigned Data controller  throughout the duration of the relationship and for a period of ten years following termination of the aforementioned relationship, for legal or legislative obligations (such as conserving accounting documents,  storing contract documents for  any contentious procedure  or  contractual liabilities).  On expiry of that period, data will be cancelled or made anonymous.

communication and sharing of data

Personal data shall not be disseminated or transferred to countries outside the EU.  Apart from communications made to comply with statutory requirements, such as legal obligations and those foreseen by community rules and regulations, the personal data of the supplier may be disclosed in Italy to public authorities or private institutions, to companies or professionals providing IT consultancy services, consultancy services on organizational management, legal and accounting services, who require to access the user’s data for the purpose mentioned above.  All of them shall be provided by the undersigned Data controller of the information which is strictly necessary to achieve the aims for which personal data were collected; this would be done in full respect of the data confidentiality and protection. Some of these categories of persons use the data for the same means as defined above in their capacity as independent Persons in Charge.  The list of the subjects or the subject categories to whom the personal data can be communicated or that can get to know them as appointed representative  is at your disposal at the premises of the data controller.

Availability of data

The subjects or the subject categories who can access your personal data, in the capacity of data processors or persons in charge of processing the said data, and within the sphere of their respective functions for the performance of their tasks and in accordance with the instructions received, are the employees of AMS Analitica specifically authorized to handle this data for the fulfillment of the aforementioned purposes.

Diritti dell'interessato

With regard to these data and at any time,  by sending simple written notice to the Data Controller even by email, directly and/or through a delegated person, you will be able to:
  • obtain access to personal data to know the origin of the data, the purposes of data processing, the logic applied to the processing through electronic media, data categories, recipients or categories of recipients of personal data to whom such data may be communicated,  the conservation period of the data by the recipient, and their communication in an intelligible form;
  • obtain the correction, or supplementing of the information, the deletion of data, or the restriction of their processing;
  • object to the processing of your personal data ;
  • obtain  data portability,  where relevant ;
  • withdraw your consent at any time ;
  • lodge a complaint with a supervisory authority.
The above mentioned rights shall be exercised in accordance with the procedures and provisions of the reference regulations.

PERSONAL DETAILS OF DATA CONTROLLER

Data controller of the processing is the company AMS Analitica  with registered office in Italy - Pesaro,  Ple Coralloni, 12   – email info@amsanalitica.com – Ph +39 0721 26243